Meridian Audio 565 - Manual (Page 14)

10
Setting up the digital surround processor
Audio inputs
The following table gives details of the three audio inputs:
Use this input To connect to this
ANALOGUE INPUT An analogue source such as a TV,
L and R video recorder, radio tuner, or
analogue preamplifier.
DIGITAL IN A digital source, such as the 562 or
562V Digital Control Unit, or a CD
player.
OPTICAL IN A digital-optical source, such as a
LaserDisc player, the 519
Demodulator, or a CD player with no
digital-cable output.
Audio outputs
The following table gives details of the analogue and digital
outputs:
Use this output To connect to this
MAIN 1-2 Main left and right speakers.
CENTRE/SUB 3-4 Centre speaker and centre or mono
subwoofer.
SIDES/SUB 5-6 Left and right subwoofers, or side left
and side right surround speakers.
REARS 7-8 Left and right rear surround speakers.
To use a Meridian DSP Loudspeaker in a particular position
connect it to the appropriate digital output.
To use an analogue speaker, in conjunction with a suitable
power amplifier, connect the input of the power amplifier to the
appropriate analogue output.