Furuno FM-8800D User Manual

Page 52

3. DSC OPERATION FOR NON-DISTRESS CASES

3-6

1) Sending automatic acknowledge (ACK BQ) with comply status “ABLE.” See

the procedure below.

2) Sending automatic acknowledge (ACK BQ) with comply status "UNABLE."

See the procedure on page 3-7.

3) Manually acknowledging a coast or ship call with "ABLE." See the procedure

on page 3-8.

4) Manually acknowledging a coast or ship call with "UNABLE." See the

procedure on page 3-9

1) Sending automatic acknowledge (ACK BQ) with comply status "ABLE."

1. When the automatic acknowledge feature is active (AUTO ACK), the comply

status is "ABLE" and a coast or ship call is received, the auto acknowledge
(ACK BQ) call is sent immediately. The display shown below appears. The
alarm sounds and the ALARM LED blinks two minutes.

Able acknowledge
transmitted.

ROUTINE
COMM MODE : TELEPHONE
COMM OPTION : NO INFO
CH : 12
ACK

CANCEL ALARM

2. Press the CANCEL key to silence the alarm. The following display appears.

** Send Message **

PRESS ENT

COAST ACK

ROUTINE

COMM MODE : TELEPHONE
COMM OPTION : NO INFO
CH : 12
ACK

TO : 003456789*

: If the coast or ship ID is registered in FILE,

the registered name appears.

3. Press the ENT key. You can now communicate with the party, over the VHF

channel specified.