30 system menu, System menu description – Furuno 1623 User Manual
Page 23
1. OPERATION
16
1.30 System Menu
The System menu mainly contains items
which once set do not require frequent
adjustment. You may display this menu by
choosing “SYSTEM MENU” from page 3 of
the User menu and then pressing
►
.
SYSTEM MENU
LANGUAGE
English
RANGE UNIT
: nm
DEPTH UNIT
: ft
SPEED UNIT
: kt
WIND UNIT
: kt
TEMP UNIT
:
°
F
NAV DATA
:
KEY BEEP
: ON
RINGS
: OFF
WAYPOINT MARK
: OFF
(1/3)
[MENU/ESC] : Exit.
SYSTEM MENU
(2/3)
[MENU/ESC] : Exit.
SYSTEM MENU
(3/3)
RANGE 0.125nm
ON
0.25 nm
: ON
0.5 nm
: ON
0.75 nm
: ON
1 nm
: OFF
1.5 nm
: ON
2 nm
: OFF
3 nm
: ON
4 nm
: OFF
6 nm
: ON
8 nm
: ON
12 nm
: ON
16 nm
: ON
[MENU/ESC] : Exit.
PAGE 3
PAGE 2
PAGE 1
Page no.
EBL REFERENCE
TRUE
BEARING READOUT : TRUE
CURSOR POSITION : RNG&BRG
TRIP SOURCE
: LAT/LON
WIND SPD/DIR
: APPARENT
SHIFT MODE
: MANUAL
AUTO SHIFT SPEED : 15
TX SECTOR BLANK
: OFF
BLANKING START
: 000
°
BLANKING AREA
: 000
°
LOCAL TIME SETUP : +0:00
ANTENNA SPEED
: AUTO
System menu
System menu description
Page 1 of system menu
LANGUAGE: The system language is
available in English, several European
languages and Japanese. To change the
language, choose language desired, and then
press the [MENU/ESC] key.
RANGE UNIT: Chooses the unit of range
measurement among nautical miles,
kilometers and statute miles.
DEPTH UNIT: Chooses the unit of depth
measurement among meters, feet, fathoms,
Hiro (Japanese) and Passi/Braza. Requires
depth data.
SPEED UNIT: Chooses the unit of speed
measurement among knot, mile per hour and
kilometer per hour. Requires speed data.
WIND UNIT: Chooses the unit of wind
measurement among mile per hour, kilometer
per hour and meters per second. Requires
wind data.
TEMP UNIT: Chooses the unit of water
temperature measurement from Celsius and
Fahrenheit. Requires water temperature data.
NAV DATA: Chooses the amount of nav data
to display among two, three and four items.
Requires appropriate sensors.
KEY BEEP: A beep sounds to confirm valid
and invalid operation. You can turn this beep
on or off.
RINGS: Turns the range rings on or off.
WAYPOINT MARK: The waypoint mark
shows the location a destination waypoint set
on a navigator. You can turn this mark on or
off. Requires a navigator.