Fujitsu Siemens Computers S7220 - Manual (Page 18)

18
L i f e B o o k S S e r i e s B I O S
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the
Wake Up On LAN feature, and setting the volume and video memory size.
Figure 12. Miscellaneous Configurations Submenu
Table 12: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of the Advanced
Menu
Menu Field Options Default Description
Power Button: ■ Disabled
■ Power Off
[Disabled] Selecting Disabled disables the power button. Selecting Power Off allows you to
turn off system power with the power button.
Wake up on LAN: ■ Disabled
■ Enabled
[Disabled] Selecting Enabled allows the system to wake when the internal LAN device receives
a specific signal while in power-off state. Selecting Disabled disables this feature.
On Battery: ■ Enabled
■ Disabled
[Enabled] When this is disabled, Wake up on LAN is only enabled when the AC Adapter is
connected.
Force LAN Boot: ■ Disabled
■ Enabled
[Disabled] This feature is active only when “Wake up on LAN” is enabled. When enabled, in
the event of a system wake-up on LAN, the system will try to first boot from the
LAN before attempting to boot from any other device, regardless of the BIOS boot
priority settings or disabling of the Preboot Execution Environment.
Resume on LAN: ■ On AC
mode only
■ Always
Enabled
[Always
Enabled] When [On AC mode only] is selected, wake up on LAN from sleep or hibernate is
enabled only when the AC Adapter is connected. Note that Wake up on LAN from
Sleep or Hibernate is determined by the OS setting.
Auto Save To Disk: ■ Off
■ On
[On] Turns the Auto Save To Disk feature off and on. When turned on, a suspended
system will save it state to disk and then turn off when a low battery state is
reached.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Item Specific Help
Configures the power
button.
*ACPI OS ignores this
setting.
Miscellaneous Configurations
Power Button:
Wake up on LAN:
On Battery:
Force LAN Boot:
Resume on LAN:
Auto Save To Disk:
Volume Setting:
Hardware Power Management:
Low Power Mode:
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Always Enabled]
[On]
[Middle]
[Enabled]
[Enabled]
Phoenix SecureCore(tm) Setup Utility
Info System Advanced Security Boot Exit