FUJITSU 32-Bit Microcontroller MB9B500 Series - Manual (Page 33)

3) Don’t Check “Update Target before Debugging” checkbox
Figure 5-27: Select Update Target Before Debugging
If user need to program the hex file into Flash via UART or USB programmer, a hex file
need to be produced first.
„ How to Make a HEX File
1) Check “Create HEX File” checkbox (This file is Intel Format HEX)
Figure 5-28: HEX File Generation in Keil IDE
2) User can find the generated file in path “..\output\debug\”
33