FUJITSU MCJ3230AP - Manual (Page 125)

4.6 Packet Commands
C156-E205-01EN 4-53
The DevType specifies the Device Type value that is provided in response to the
Identify command and the Identify Packet Device command. To validate the
specified value, instruct the system to save the specification, and power on again.
The Verify Control Page can be saved.
Table 4.65 Verify Control Page variable
Bit
Byte
7 6 5 4 3 2 1 0
2 1 1 0 11b
3 0 1Fh
4-7 0
Table 4.66 Verify Control Page default value
Bit
Byte
7 6 5 4 3 2 1 0
2 1 0 0 00b
3 0 0h
4-7 0
4.6.5 Mode Select (10) command
Table 4.67 Mode Select (10) command
Bit
Byte
7 6 5 4 3 2 1 0
0 Operation Code (55h)
1 Reserved PF Reserved SP
2-6 Reserved
7-8 Parameter List Length
9-11 Reserved
The MODE SELECT (10) command performs the same processing as the MODE
SELECT (6) command.
For an explanation of each field, see the MODE SELECT (6) command.