FUJITSU MCJ3230AP - Manual (Page 111)

4.6 Packet Commands
C156-E205-01EN 4-39
4.6 Packet Commands
The ODD supports the packet commands listed below.
Table 4.38 Packet command codes and parameters
Command Operation code Section
ERASE (10) 2Ch 4.6.1
FORMAT UNIT 04h 4.6.2
INQUIRY 12h 4.6.3
MODE SELECT (6) 15h 4.6.4
MODE SELECT (10) 55h 4.6.5
MODE SENSE (6) 1Ah 4.6.6
MODE SENSE (10) 5Ah 4.6.7
PREVENT/ALLOW MEDIUM REMOVAL 1Eh 4.6.8
READ (10) 28h 4.6.9
READ CAPACITY 25h 4.6.10
READ FORMAT CAPACITIES 23h 4.6.11
READ DEFECT DATA (10) 37h 4.6.12
READ DEFECT DATA (12) B7h 4.6.13
READ LONG 3Eh 4.6.14
RECEIVE DIAGNOSTIC RESULTS 1Ch 4.6.15
REQUEST SENSE 03h 4.6.16
SEND DIAGNOSTIC 1Dh 4.6.17
SEEK (10) 2Bh 4.6.18
START STOP UNIT 1Bh 4.6.19
SYNCHRONIZE CACHE 35h 4.6.20
TEST UNIT READY 00h 4.6.21
VERIFY 2Fh 4.6.22
WRITE (10) 2Ah 4.6.23
WRITE AND VERIFY 2Eh 4.6.24
WRITE BUFFER 3Bh 4.6.25
WRITE LONG 3Fh 4.6.26