Fujitsu Siemens Computers LifeBook E8310 - Manual (Page 13)

13
Table 6: Fields, Options and Defaults for the Serial/Parallel Port Configuration Submenu of Advanced Menu
Menu Field Options Default Description
Serial Port: ■ Disabled
■ Enabled
■ Auto
[Enabled] Configures the serial port using either no configuration (Disabled),
a user defined configuration (Enabled), or by allowing the BIOS or
OS to choose the configuration (Auto).
Base I/O Address/IRQ: ■ 3F8/IRQ 4
■ 2F8/IRQ 3
■ 3E8/IRQ 4
■ 2E8/IRQ 3
[3F8/IRQ 4] Allows user to set the serial port base I/O address and interrupt
request when serial port is Enabled.
Infrared Port: ■ Disabled
■ Enabled
■ Auto
[Enabled] Configures the infrared port using either no configuration (Dis-
abled), a user defined configuration (Enabled), or by allowing the
BIOS or OS to choose the configuration (Auto).
Mode: ■ IrDA
■ FIR
[FIR] When the infrared port is enabled this option is available allowing
the user to set the mode for the infrared port.
Base I/O Address/IRQ: ■ 3F8/IRQ 4
■ 2F8/IRQ 3
■ 3E8/IRQ 4
■ 2E8/IRQ 3
[2E8/IRQ 3] Allows user to set the infrared port I/O address and interrupt
request when the infrared port is Enabled.
DMA Channel: ■ DMA 1
■ DMA 3
[DMA 3] Allows user to set the infrared port DMA Channel when the infra-
red port is Enabled.
Parallel Port: ■ Disabled
■ Enabled
■ Auto
[Enabled] Configures the parallel port using either no configuration (Dis-
abled), a user defined configuration (Enabled), or by allowing the
BIOS or OS to choose the configuration (Auto).
Mode: ■ Output Only
■ Bi-directional
■ ECP
[Bi-directional] When the parallel port is enabled this option is available allowing
the user to set the parallel port mode. Bi-directional allows two-
way transfer of information between your notebook and a con-
nected parallel device. Output Only (Half Duplex) allows informa-
tion to be transferred in only one direction, from your notebook to
the printer or similar device. ECP Mode allows communication
with the ECP class of parallel I/O devices.
Base I/O address: ■ 378
■ 278
■ 3BC
[378 Allows user to set the parallel port base I/O address when the par-
allel port is Enabled.
Interrupt: ■ IRQ 5
■ IRQ 7
[IRQ 7] Allows user to set the parallel port interrupt when the parallel port
is Enabled.
A d v a n c e d M e n u