Hawking Technology CS152F - Manual (Page 11)

Port Selection
Controlling all the PCs connected to your CS152F from a single console couldn’t be
easier. You can access any PC on the chain using two methods: Manual or HotKey.
! Manual
Simply press the “Select” button located on top of the CS152F to switch back and
forth between computers. The selected LED lights indicate the port that is currently in
use.
! HotKey Navigation
HotKey navigation allows you to conveniently access connected PCs directly from the
keyboard, instead of having to manually select by pressing the “Select” button on the
CS152F switch. To select a port with the HotKey method, do the following:
1. Press and release the [Scroll Lock] key twice within 2 seconds and press:
a) “Up-Arrow” to select the previous channel,
b) “Down Arrow” to select the next channel,
c) [S] key to set the KVM switch into Auto Scan Mode.
- 9 -