Hunter Fan 30777 - Manual (Page 10)

42934-01 10
Air Purifier Maintenance
Cleaning Your Air Purifier
Proper maintenance of your Hunter Air Purifier will help ensure years of trouble free
service.
Follow these steps to properly maintain your Air Purifier:
1. Approximately every 90 days, the outside of the unit should be cleaned with a soft,
damp cloth.
2. If needed, the Front Grill can be removed from the unit and cleaned with soapy water.
NOTE: Remove the Carbon Odor Filter before exposing the Front Grill to water.
3. Follow the instructions in Cleaning the Pre-Filters and Changing the Carbon Odor
Filter (pg. 10) and Changing the HEPAtech ® Main Filter (pg. 11) to determine when
and how to replace the filters.
NOTES:
• The Air Purifier must be unplugged during the cleaning process.
• Be sure the unit is completely dry before plugging in and using.
• Never immerse unit in water.
Cleaning the Pre-Filters and Changing the Carbon Odor Filter
When the Pre-Filter exceeds 1400 hours (refer to Filter Life Counters for additional infor-
mation, pg. 8), the Pre-Filter indicator will turn on as a reminder that you should clean the
Pre-Filter and change the Carbon Odor Filter. To maintain proper odor-removing capability
and overall filtration performance, the pre-filter should be cleaned and the carbon odor
filter replaced every 1400 hours (approximately 3 months of use). If necessary, clean the
pre-filter and change the odor filter more often. Proper maintenance of the pre-filter will
help extend the life of the HEPAtech
®
filter. Refer to Obtaining Replacement Filters (pg. 13)
if you need help finding replacement filters.
To clean the Pre-Filters, Change the Carbon Odor Filter, and reset the Pre-Filters & Carbon
Odor Filter Life Counter:
1. First, turn off and unplug the Air Purifier.
2. Next, remove the front grill. Refer to Figs. 4 and 5 (pg. 6).
3. Remove the Pre-Filters (ref. Fig.2, pg. 4) and use a vacuum cleaner to remove
dust from them. Then, reinsert the Pre-Filters into the Air Purifier.
5. The Carbon Odor Filter is held to the back of the Front Grill with four hook-
and-pile fasteners. Peel off the old Carbon Odor Filter and gently press a new
filter into place .
6. If needed, use a soft damp cloth to wipe off the Front Grill.