Hughes & Kettner Preamp/Recording Amp User Manual
Page 7

RACK MOUNTING / BASS MASTER STAGEBOARD: The
BATT can be
used as a stand-alone preamp or as an extension to an existing system. Hughes &
Kettner offer special single and twin adaptors to faciliate 19” rack mounting.
A
Sound Machines STAGEBOARD is optionally available for easy on-stage
switching of two units (Unit1 / Unit 2 / Bypass ).
THE STAGE/LIVE SET-UP FOOTSWITCH:
A jack for connecting the BATT
STAGEBOARD, designed to faciliate
on-stage switching between different
sounds such as two different
BATTs.
The
INSTRUMENT OUT socket of the
first unit is connected to the INPUT of
the second. The second unit‘s LINE
OUT jack is then used to control the
amplifier/speaker combination for the
stage sound. The PA OUT signal of each
unit can be connected to a separate
channel on the mixing console, and the
STAGEBOARD connected to both can
switch between the two.
PLEASE NOTE: VALVES NEED TO REACH THEIR CORRECT OPERATING
TEMPARATURE FOR THIS REASON, THE BATT NEEDS A FEW MOMENTS TO
WARM UP AFTER SWITCHING ON BEFORE IT IS READY FOR USE.
VALVES GENERATE HEAT,MAKESURETHATTHE AIRVENTSARE
NOT BLOCKED.
HOT VALVES ARE SENSITIVE TO SHOCKS. ALLOW THE UNIT TO COOL OFF
BRIEFLY BEFORE MOVING IT. AVOID JOLTING THE BAIT DURING
OPERATION.
TECHNICAL
DATA:
POWER RATING: APPROX 25 WATTS
INPUT SENSMTY: 300 mV/ - 10 dB
FUSE VALUE:
315 mV / SLO-BLO.