Lint filter, Safety lid switch – haier HWM50TLF User Manual

Page 12

Text mode
Original mode

Lint Filter

The lint filter mustbe usedduring washing.
It mustbe cleanedin timeafter eachusing.

1. Take off the lint filter.

Pull up the lint filter from the agitator.

2. Remove lint

Press the lint screenclip with your thumband index finger, and get the screen
downward as shown in figure below. While wet, removethe lint from the screen.

3. Install the lint filter

After cleaning,install the screenbackonto the lint filter. Then put the lint filter
backin the agitator barrel.

Safety Lid Switch

If for any reason you openthe lid in the middleof the wash cycle,the
washer will not spin and will shut off automatically

. Oncethe lid is

closed,the washer will start backon.

Figure 3

Agitator

Press

Lint filter

Lint Screen

Figure

Figure 2

Pull up out

Press