beautypg.com

Avr 1565, Key features, Key specifications – Harman-Kardon AVR 1565 User Manual

Page 2

background image

HARMAn Consumer, Inc.

8500 Balboa Boulevard, northridge, CA 91329 USA

www.harmankardon.com

© 2011 HARMAn International Industries, Incorporated. All rights reserved.

Harman Kardon and Logic 7 are trademarks of HARMAn International Industries, Incorporated, registered in the United States and/or other countries. Dolby and Pro Logic are registered

trademarks of Dolby Laboratories. DTS is a registered trademark of DTS, Inc. DTS-HD Master Audio is a trademark of DTS, Inc. HDMI is a registered trademark of HDMI Licensing LLC.

Blu-ray Disc is a trademark of the Blu-ray Disc Association.
Features, specifications and appearance are subject to change without notice.

5.1-channel, 70-watt audio/video receiver with HDMI v.1.4a with 3-D

Key Features

Power/Technology

Powers a 5.1-channel surround-sound system

70 watts of power per channel

High-current-capability (HCC), ultrawide-bandwidth amplifier

design for accurate, dynamic sound and emotional impact

HDMI v.1.4a with 3-D and Deep Color for playing 3-D content

such as movies, TV shows and sporting events

Dolby TrueHD and DTS-HD Master Audio decoding for high-

resolution sound that matches high-resolution video

Logic 7 processing turns conventional stereo sources into

5.1-channel surround sound

FM/AM tuner with 30 station presets

Surround-sound decoding for all popular Dolby and DTS

soundtracks

Lip-sync adjustment delays the audio signal to match the

video signal

Connectivity

Three HDMI outputs provide extensive video connectivity

One component and three composite video inputs

Three digital audio inputs and six analog audio inputs

Front-panel analog audio input makes it easy to connect to

portable sources

Subwoofer pre-out allows for connecting to a powered subwoofer

Color-coded binding-post speaker connectors for secure

connections

Headphone jack with HARMAn headphone surround mode for

stereo headphones

Subwoofer trigger output for compatible subwoofers

Upgradeable firmware via USB port to keep receiver’s

performance up to date

Detachable IEC power cord makes installation easier

Ease of Use

On-screen display (OSD) makes setting up the receiver easy

Programmable IR remote can control your entire audio/video

system

Two-line dot-matrix information display for listening to

music – without turning on the TV

30 FM/AM radio-station presets make it easy to find your

favorite station

Key Specifications

Audio Section

Stereo mode, continuous average power: 70 watts/channel,

1kHz, <0.9% THD, both channels driven @ 8 ohms

Multichannel power: 70 watts/channel, 1kHz,

<0.9% THD, two channels driven @ 8 ohms

Bandwidth @ 1W (+0dB/–3dB): 10Hz – 100kHz

Input sensitivity/impedance (line-in): 200mV/47k ohms

Signal-to-noise ratio (IHF-A): 100dB

Adjacent channel separation – Dolby Pro Logic

®

I/II: 40dB,

Dolby Digital: 55dB, DTS: 55dB

High instantaneous-current capability (HCC): ±25 amps

Transient intermodulation distortion (TIM): unmeasurable

Slew rate: 40V/μsec

FM Tuner Section

Frequency range: 87.5MHz – 108.0Mhz

Usable sensitivity (IHF): 1.3μV/13.2dBf

Signal-to-noise ratio (mono/stereo): 70dB/65dB

Distortion (mono/stereo): 0.15%/0.3%

Stereo separation: 40dB @ 1kHz

Selectivity (±400kHz): 70dB

Image rejection: 80dB

IF rejection: 90dB

AM Tuner Section

Frequency range: 520kHz – 1720kHz

Signal-to-noise ratio: 45dB

Usable sensitivity (loop): 500μV

Distortion (1kHz): 50%, mod 0.8%

Selectivity (±10kHz): 30dB

Video Section

Television format: nTSC

Input level/impedance: 1Vp-p/75 ohms

Output level/impedance: 1Vp-p/75 ohms

Video frequency response (composite video): 10Hz – 8MHz (–3dB)

HDMI v.1.4a with 3-D and Deep Color

General

Power requirement: AC 120V/60Hz

Power consumption: 65W idle; 540W maximum

(five channels driven)

Dimensions: 17-5/16" x 6-1/2" x 15"

(442mm x 165mm x 381mm)

Weight: 20.5 lb (9.3kg)

AVR 1565