Hama VPL-CX86 - Manual (Page 26)

C:\data\Projector\AirShot\AirShot_FMData\2634400112_VPL-
CX8676_AirShot\2634400112_VPL-
CX8676_AirShot\2634400112\2634400112VPLCX8676WW\02C01.fm masterpage: Left
26
Others
VPL-CX86/CX76
2-634-400-11 (1)
The computer and projector are
connected in the main window
of Projector Station for Air
Shot Version 2 but the image
cannot be projected on the
projector. • The projector is set to a picture muting.
c Press the PIC MUTING key on the remote commander to
release the muting.
• INPUT C (VPL-CX86) or INPUT B (VPL-CX76) is not
selected on the projector.
c Press the AIR SHOT key on the remote commander or
select INPUT C (VPL-CX86) or INPUT B (VPL-CX76)
using the INPUT button.
• [Memory Stick] is selected in INPUT C (VPL-CX86) or
INPUT B (VPL-CX76).
c Press the AIR SHOT key on the remote commander.
The image displayed on the
projector is different from that
of the computer. • The following application software or screen saver may not
be transported correctly.
– Application software that uses DirectX
– Application software that plays back a movie
– Microsoft Office assistant
– Microsoft IME tool bar
– Tool tip displayed by mouse over
• [Set PC desktop to Projector resolution] in the [Option
Setting] - [Connection Setting] is unchecked and the image
of the computer is displayed in a higher resolution than the
XGA.
c An image on the projector is deteriorated when the
computer is set to a higher resolution than the XGA.
The image of one computer
cannot be projected on several
projectors. • Simple Mode is selected.
c Set the projector and computer to Manual Mode and set the
network and wireless settings.
Even when the computer, OS and wireless LAN device of the
recommended system are used, several computers may not be
connected.
The computer cannot access
the Web page of the projector. • The projector is not displayed in the main window of
Projector Station for Air Shot Version 2.
c See “The computer is not displayed in the PC list.
(Projector)” on page 25.
• The browser of the computer is set to “Access the Internet
using a proxy server”.
c Set to “Access the Internet without using a proxy server”.
• The version of the browser is old.
c Use Internet Explorer version 5.0 or higher.
The mouse pointer displayed
on the projector is different
from that of the computer. • [Track mouse shape] in the [Option Setting] - [Connection
Setting]-[Advanced] is not checked.
c Check [Track mouse shape].
The shape of the mouse on the projector is displayed in black and
white.
Symptom Cause and Remedy
Note
Note