Husqvarna 225 HBV - Manual (Page 4)

2
– English
INTRODUCTION
!
WARNING!
Under no circumstances may the
design of the machine be modified
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorised
modifications and/or accessories
can result in serious personal
injury or the death of the operator
or others.
Your warranty does not cover
damage or liability caused by the
use of non-authorized accessories
or replacement parts.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to
modify the design and appearance of products
without prior notice.
This decal certify that the product has been
approved in accordance with American
exhaust emission requirements EPA PH1.
IMPORTANT ENGINE INFORMATION
HUSQVARNA AB HUSKVARNA SWEDEN
TWC
REFER TO OPERATOR`S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
FOR SMALL NON - ROAD ENGINES.
EP THIS ENGINE CONFORMS TO U.S. PH1 A
This operator’s manual describes in detail how to
use and service the blower and how to carry out
regular maintenance. It also describes which meas-
ures should be taken to achieve maximum safety
while operating the blower, how the safety devices
work and how they should be serviced.
Note! The section of the manual that deals with
safety, must be read and understood by all persons
who come in contact with the blower.
This operator’s manual has been written for those
who need guidance when it comes to fault tracing,
thorough servicing and carrying out corrective
maintenance of the blower.
There are warning symbols on the blower. These
are illustrated on page 3. Should any of the warning
symbols on the blower become disfigured or worn,
new ones should be ordered and fitted to the blower
as soon as possible. Note that some of the warning
symbols are molded in certain components of the
blower.
The blower is used for blowing away or vacuuming
up leaves and other debris on the ground. When
operating the blower, the operator must stand with
both feet firmly on the ground.