Hampton Direct H35-NG1 - Manual (Page 36)

36 Hampton ® H35 Direct Vent Freestanding Gas Stove
INSTALLATION
DOOR HINGE
REMOVAL
1) Remove the cast top by lifting it off of the
stove.
2) Release the catches on the left and right
side of the stove that secure the glass.
3) Remove the glass by sliding it up and out.
4) Pull all four door hinges out from the sides
of the front casting.
Release catch by
pulling up.
5) Use a 7/16" wrench to remove the screws
that secure the door hinges.
Remove screws.