Harbor Freight Tools 96329 - Manual (Page 2)

Page 2 96526/27/28 For technical questions, please call 1-800-444-3353.
saVe this Manual
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in
the back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
general and speciFic saFety rules
Warning! read all instructions. Failure to follow all instructions listed
below may result serious injury.
SAVE THESE INSTRUCTIONS
Work area safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
personal safety
Inspect this Threshold often. Repair or replace if needed.
Always wear ANSI-approved safety goggles during installation of this product.
Use this Threshold only for intended purpose.
Stay alert, watch what you are doing and use common sense when installing.
Do not install while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention may result in serious personal injury.
Do not overreach. Keep proper footing and balance at all times.
Keep out of reach of children.
Maintain labels and nameplates. These carry important safety information. If
unreadable or missing, contact Harbor Freight Tools for a replacement.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
saVe these instructions.
1.
2.
a.
b.
c.
d.
e.
f.
3.
4.