haier HM1400TX - Manual (Page 17)

Check that:
the tap is open and properly connected to the inlet
pipe;
Solution to Problems
Even though your washing machine has been
carefully designed and constructed, something could
still go a miss with your machine. Before rushing to
phone one of our service centres, however, please
check that the operations listed below have been
carried out. In many cases you will save time, money
and bother. Our statistics show that many of the calls
received by our service centres could have been
avoided with just a little more attention.
Check that:
the plug is pushed right into the mains socket;
the door is closed tightly:
the "ON/OFF" button has been pressed.
Check that:
the drain pipe is placed at least 80 cm/32 inches
Check that:
the drain pipe is not blocked;
the drain pipe is not connected at a height more than
1 metre/40 inches above ground level.
Check that:
the detergent being used is meant for automatic
machines and not for washing by hand;
that the amount used is that shown in this manual
and not more.
The washing
machine
won't start
The washing
machine won't
fill with water
The machine
fills and drains
continuously
The machine
will not drain
drain the water
There is too
much foam in
the tub