Hafler 9130 - Manual (Page 5)

PERFORMANCE SPECIFICATIONS
GENERAL
INFORMATION
All specifications are for 20 Hz - 20 kHz, at full power into 8 ohms, unless specified otherwise.
Power Rating:
Rated THD:
Full Power Bandwidth:
Signal to Noise Ratio:
Input Impedance:
Input Sensitivity:
Damping Factor:
Controls:
Inputs:
outputs:
Power Consumption:
Size:
Weight:
65 watts per channel (8 ohms)
less than 0.008%
4 Hz to 40 kHz
greater than 100 dB, unweighted
22,000 ohms
1.1 volts RMS
100 to 1 kHz, 50 to 10 kHz
Power Switch, Left/Right Gain Controls, Mono/Stereo Switch
Right and Left/Mono RCA jacks
Right, Left, and Mono 5-way Binding Posts
40 watts quiescent, 600 watts maximum
17”(W) x 9”(D) x 3.5”(H) excluding feet, faceplate 17” or 19”(W)
43.2cm(W) x 22.8cm(D) x 8.9cm(H) excluding feet,
faceplate 43.2cm or 48.3cm(W)
20 Ibs., 9 kg, net.
-4-