HSM Securio B32 - Manual (Page 10)

10 0804
english
3 Machine components
Operating and display elements
Reverse button
Display options:
Container full
Cutting unit blocked
Door open
Ready for operation
Operation button
Switching on the shredder
• Press the operation button.
The “Ready for operation” indicator lights up.
Shredding paper
• When you feed paper, the light barrier auto-
matically starts the cutting unit.
Two seconds after the light barrier in the
paper feed opening is free again, the cut-
ting unit is switched off automatically and the
shredder switches to standby.
Note:
You can fold the safety
element upwards to
shred larger quantities
of paper. This makes it
easier to access the feed
opening.
Shredding CDs
(only in cut size: 3.9 mm, 5.8 mm)
• Switch the shredder to permanent mode:
Press the operation button for four seconds.
• Only feed the material
into the insertion slot of
the safety element (splin-
ter protection).
• Switch off permanent mode: Press the opera-
tion button.
Note:
To completely separate
the materials shredded,
you can insert the CD
bag supplied.
Shredding credit cards
Feed the cards through the CD slot when the
cut size is 3.9 mm and 5.8 mm. For other ma-
chines, use the opening for paper.
Switching off the shredder
• Press the operation button.
The “Ready for operation” indicator goes out.
4 Operation
7
2
5
4
1
8
3
6
1 Safety instructions
2 Feed opening for CDs
3 Safety element / splinter protection
4 Operating and display unit
5 Name
plate
6 Door
7 Feed opening for paper and credit cards
8 Light
barrier