Humax HDCI-2000T - Manual (Page 56)

10.5 Antenna Power
You can turn the antenna power on or off.
• Power on the antenna only in the following case:
-
If you are using an active antenna that has its power supplied by the aerial.
• Power off the antenna in the following cases and in all other cases:
-
If you are using an active antenna with its own power source.
- If you are using a passive antenna.
Caution: Be sure to turn off the antenna power when using an active antenna with its own power source. Damage
may occur to the antenna if left on.
**
1. Press the MENU button.
2. Select Installation using the button and press the OK
button.
3. Select Antenna Power using the button and press the OK
button.
4. Select On/Off using the OK or button. You will be
prompted to enter your password when selecting On.
**
Note: The default password is 0000.
10. Installation
GB 55