Husqvarna HUV 4421-G / GXP - Manual (Page 39)

Engine Oil
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual Page 37
7. Use a socket or wrench to replace the oil drain plug (1) (Figure 22 or Figure 23). Turn the plug clockwise
and tighten to 29 ft-lb (40 N·m) for Honda gas vehicles, 61 in-lb (6.9 N·m) for Kawasaki gas vehicles with
plastic drain plugs,14.5 ft-lb (20 N·m) for Kawasaki gas vehicles with metal drain plugs, or 31 ft-lb (42 Nm)
for diesel vehicles.
Engine Oil Filter Change
1. Drain the engine oil. See Engine Oil Draining on page 36.
2. Place the oil drain pan under the engine oil filter (2) (Figure 23 or Figure 24, Page 38).
3. Remove the engine oil filter. Turn it counterclockwise and drain the residual oil in the filter port and filter
into the oil drain pan. See following NOTE.
Figure 22 Engine Oil Drain Plug and Pan –
Gasoline Vehicles
Figure 23 Engine Oil Drain Plug and Oil Filter –
Diesel Vehicles
Figure 24 Replace Engine Oil Filter –
Honda Gasoline Vehicles
Figure 25 Replace Engine Oil Filter –
Kawasaki Gasoline Vehicles
1
1
2
2
2