Hawking Technology CS154F - Manual (Page 12)

Auto Scan Mode
The CS154F Auto Scan feature automatically switches between the two PCs at regular
8 second intervals so that you can monitor their activity without having to take the
trouble of switching yourself. To invoke the Auto Scan Mode, key in the following
HotKey combination:
[Scroll Lock] + [Scroll Lock] + [S]
Reminder: Press and release the [Scroll Lock] key twice within 2 seconds.
Once scanning begins, it continues until you press any other key to exit Auto Scan
Mode. The port that was currently active at the time when scanning stopped remains
active.
Last/Next Mode
The Last/Next feature is provided to enable you to quickly switch back and forth
between computers in order to monitor them manually, instead of using Auto Scan
Mode. This method lets you dwell on a particular port for as long or as little as you
like – as opposed to Auto Scan Mode, which switches after a fixed interval.
1. Press [Scroll Lock] + [Scroll Lock] + “Up Arrow”
2. Press [Scroll Lock] + [Scroll Lock] + “Down Arrow”
- 10 -