Hotpoint DQ47 Mk2 - Manual (Page 11)

11
Multifunction Selector Switch
(BD62 & BD52)
The Multifunction selector switch is
used when operating the main oven.
With the exception of the O position
the main oven light will remain on when
this selector switch is used.
Off
With the selector in this position the
main oven will not heat up. The timer will
still operate.
Fan Oven
The oven fan and a rear element are
controlled when this function is
selected.
Use the main oven thermostat control
to set the required temperature.
Conventional Oven
Top and base elements are controlled
when this function is selected.
Use the main oven thermostat to set
the required temperature.
Half Grill
With this function selected only the left
hand side of the grill will be on.
Use the oven thermostat control to set
the required temperature.
Oven door must be open for grilling.
Full Grill
Both left and right hand grill elements
will be on in this position.
Use the oven thermostat control to set
the required temperature.
Oven door must be open for grilling.
Fan Grill
The oven fan and fan grill element are
controlled when this function is
selected.
Use the oven thermostat control to set
the required temperature.
O v e n d o o r m u s t b e c l o s e d f o r f a n
grilling.
Fan Only
The oven fan will operate when this
function is selected.
The oven thermostat control must be
set in the off position.
Light Only
This function switches on the oven light
only.