Hotpoint Aquarius Range WMS39 - Manual (Page 18)

18
Options
Variable spin speed
This is only available on Models WMA37 and WMA36
Use this control to reduce the programme spin speed only.
If you leave this in the maximum position (WMA37 1400 or
WMA36 1300), the spin will be the maximum which is
appropriate for whatever wash programme you have chosen.
When the wash has finished return the dial to the original
setting (i.e WMA37 1400 or WMA36 1300).
Note: You cannot alter the spin speed while the machine
is spinning.
Variable temperature
This is only available on Model WMA37 and WMS38
Use this control to reduce the wash temperature only.
If you leave this in the maximum position (95), the actual
wash temperature will be the maximum which is
appropriate for the wash programme which you have
chosen.
When the wash has finished return the dial to the original
setting i.e. 95.
Note: You cannot alter the temperature while the
machine is washing.
Automatic Features
Auto half load
Auto half load saves you time and money when washing smaller loads. Water levels are
automatically adjusted to cater for the different loads.
Unbalanced load warning
Your machine has an inbuilt feature to prevent it spinning with an unbalanced load.
This will minimise vibration and prolong the life of the machine.
If a load is not evenly distributed, the machine will try to spread it around the drum.
The ‘Final Spin’ indicator light will flash at the end of the programme if the machine
does not spin. You can open the door, re-distribute the clothes , close the door and
spin them by using a fast or slow spin programme.
PR
OGR
AMMES
& OPTIONS