Harbor Freight Tools CENTRAL PENUMATIC 90234 - Manual (Page 8)

SKU 90234 PAGE 8
8. When checking the oil level, make sure to unscrew (do not pull) the Oil
Plug (part #78) out.
9. Drain the Air Compressor’s Tank (part #50) every day. Do not allow moisture
to build up inside the Tank. Do not open the Tank Drain Valve (part #59) so that
more than four threads are showing.
10. Avoid injury. Never direct the Air Outlet Valve (part #69) at people or animals.
11. Do not alter or remove the factory sealed Pressure Relief Valve (part #67).
12. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Wear restrictive hair covering to contain long hair.
13. Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
15. Industrial applications must follow OSHA requirements.
16. Maintain this product with care. Keep this product clean for better and safer
performance.
17. Maintenance: For your safety, service and maintenance should be performed
regularly by a qualified technician.
18. Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the operation of this product. Replace
or repair damaged or worn parts immediately.
19. Replacement parts and accessories: When servicing, use only identical re-
placement parts. Only use accessories intended for use with this product.
20. Use the right tool or attachment for the job. Do not attempt to force a small
tool or attachment to do the work of a larger industrial tool or attachment.
There are certain applications for which this product was designed. It will do the
job better and more safely at the rate for which it was intended. Do not modify
this product, and do not use this product for a purpose for which it was not in-
tended.
21. To extend the life of your air tools and equipment: It is recommended to
install a water filter and oiler (available from Harbor Freight Tools) in series with
the Air Outlet Valve (part #69) of the Air Compressor.
(See Figure C, next page.)