Hotpoint WMA30 - Manual (Page 12)

Sort your laundry into groups by washcare labels.
Load the machine, making sure that clothes are not trapped
in the door. Close the washing machine door by pushing it
until it clicks.
When all selections have been made
press the ‘START/Hold To Reset’
button. To cancel a programme once
the machine has started, press and
hold in the ‘START/Hold To Reset’
button for two seconds, until the ‘End’
light flashes. You can then re-select
the programme you want.
Press the ‘START/Hold To Reset’
button again to carry on.
3
1
4
5
2
6
WARNINGS:
● Do not allow
children to
play with the
machine or
tamper with
the controls.
● Do not
overload the
machine! It
may damage
laundry and
reduce the
quality of
the wash.
● Do not try to
open the door
when the door
indicator light
is on.
● Do not open
the dispenser
drawer
during any
programme.
During the wash, the programme
progress lights will show what
stage in the cycle the programme
has reached.
7
A short time after the programme has finished the ‘Door
Locked’ indicator light will go out and you can open the
machine door.
Return the programme selector dial to the ‘OFF’ position.
We also recommend that you switch off the electricity and
water supply.
8
9
A typical wash programme
12
Select any optional wash feature(s) that you may require
by pressing the appropriate button(s), indicator lights will
show what you have chosen.
Add detergent and fabric
conditioner, if required, to the
dispenser drawer.
Refer to the detergent
manufacturer’s dosage
instructions.
Turn the programme selector
dial to the programme required.
Models WMA32 and WMA33 only.
Reduce the spin speed if you wish by turning the variable
spin speed control dial.
Model WMA33 only.
Reduce the wash temperature if you wish by turning the
variable temperature control dial.
A T
YPIC
AL W
ASH
PROGR
AMME
*Vogue aquarius 1666200001-09 04/04/2002 8:57 am Page 12