Using the vcr remote to control your cable box, Integrating your stereo system with your vcr, Hookup – Hitachi VT-FX6404A User Manual
Page 66
66
PROGRAMMING THE VCR REMOTE CONTROL TO CONTROL YOUR CABLE BOX
The VCR remote control can be programmed to control many cable boxes that are remote controlled. You
can easily change channels.
1 Turn on the cable box.
2 Point VCR remote control toward cable box
3 Press and hold the "CATV" button.
4 Press the number button corresponding to your cable box as shown in the set-up chart. The cable box
channel will change to confirm that the remote control has been set.
Cable Box Press "CATV"
and this
Cable Box Press "CATV"
and this