Hotpoint FFU00 - Manual (Page 14)

The controls
14
Starting:
● When your appliance is first installed
leave it to stand in its final location for
2-3 hours, to allow the refrigerant to
settle, before loading it with fresh or
frozen foods.
● If operation is interrupted, wait 5
minutes before restarting.
Function Display Board:
Temperature Temperature Dispenser
adjustment adjustment selection
button for button for button.
freezer refrigerator
compartment. compartment.
How to Adjust the Temperature of the
Freezer Compartment:
● When the appliance is first switched on
and also after a power cut, the temperature
control will be lit at setting 3 (Normal -
Mid setting).
● Pressing the button will change the
temperature setting:
Higher number - Colder
Lower number - Warmer
● Setting 3 (Normal) is usually suitable - but
the appropriate setting will depend on the
appliance location, room temperature, how
often the door is opened and amount of
stored food.
How to Adjust the Temperature of the
Refrigerator Compartment:
● When the appliance is first switched on
and also after a power cut, the temperature
control will be lit at setting 3 (Normal -
Mid setting).
● Pressing the button will change the
temperature setting:
Higher number - Colder
Lower number - Warmer
● Setting 3 (Normal) is usually suitable - but
the appropriate setting will depend on the
appliance location, room temperature, how
often the door is opened and amount of
stored food.
Function Display Board
Water/Ice
output
Humidity
Switch
Dispenser
push
switch