Hitachi 37HDL52A - Manual (Page 35)

34
NTSC TV/ VIDEO Mode OSD (On-Screen Display)
Adjust the language, auto channel scan, closed caption, channel list, V-chip and set lock code select
function of your display.
Initial Setup Function Options
Language Set the language for the OSD.
- English
- Francais
- Espanol
Auto Channel Scan
Choose a TV source, performs an automatic
channel search, add and delete channels.
(Not available for Video signal)
TV Source: Air or CATV Channel
Auto Search: Scan channels 1 to
125 for a signal and Add or Erase
channel. See “Setting Up
The TV
Channels” on page 36.
Closed Caption
Display text.
(Not available for Video signal) See “Setting up the Closed
Caption” on
page 36.
Channel List
Display memorize channel, add and delete
channels
(Not available for Video signal)
See “Setting Up The TV Channels”
on page 36.
V-Chip
Require a password to be entered to view
movies and TV programs with unsuitable ratings
for some viewers who share the TV.
(Not available for Video signal)
See “Setting up the V-chip” on page
36.
Set Lock Code
Set and enter a new password.
(Not available for Video signal)
Press “menu” key to turn on
OSD menu. Then, selecting
“initial setup“ turn on next OSD
menu. And then, selecting “set
lock code” menu will show a key
icon. Please press “o” to pass
through and turn on next OSD
menu, too. Please select “set
lock code” item to set a new
password. Finally, please press
“Finish” to well complete.
NOTE:
If you forget the password, please
enter “1234 “to erase the password.
Manual Tuning
If the channel reception is poor, fine tune the
program See “Setting up Manual Tuning” on
page 37.
Initial Setup