haier AC282AFERA - Manual (Page 21)

19
Installation of Indoor Unit
(1) Install insulation for the drain pipe.(See Fig.12 and 13)
Cut the included insulation material to an appropriate size and adhere it to the pipe.
Insulation for Drain pipe
(To be obtained locally.Length shoud
be at least 8mm.)
Indoor unit(drain port)
Drain pipe insulation (accessories)
Drain pipe
Indoor unit
No gap
10mm or over
Drain pipe
Drain pipe insulation
(2) If "Right rear piping ":fasten the drain pipe with VT wires so that the pipe slopes
correctly within the indoor unit.
Fig. 12
Fig. 13