Hotpoint UE89X1 UQ89I - Manual (Page 13)

13
Electronic Clock &
Automatic Cooking Feature
Note: During the cooking period the cooking duration will be shown in the display for a few
seconds and then revert to the temperature set.
STEP 1. Check that the correct time of day is set, if not
follow instructions for setting the time of day.
STEP 2. Place food to be cooked on shelf in the oven.
STEP 3. Switch the main oven control to the desired mode.
The display will automatically suggest a cooking
temperature. This can be changed by turning the +/-
control knob.
(The oven will start).
STEP 4. Press the Time/Mode button, until the ‘cooking
duration’ symbol is flashing.
STEP 5. Turn the +/- control knob to set the cooking duration
you require. After a few seconds the ‘cooking
duration’ symbol will stop flashing and the display will
show the temperature that has been set. This will
change every few seconds when the display will show
the cooking duration remaining.
THE COOKING DURATION IS NOW SET.
At the end of the set cooking duration, ‘End’ will show
in the display and an audible tone will be heard for a
few seconds.
Turn the main oven control to ‘O’, the OFF position to switch the
oven off. The display will revert back to the time of day.
To cancel the automatic mode at any time turn the main oven
control to ‘O’, the OFF position.
AUTO COOKING TIMER
- +
Main Oven
Light Time/Mode
- +
Main Oven
Light Time/Mode
There are two Auto Cooking programmes for the main oven, that can be selected using the display:
(a) To set the main oven to switch ON immediately and OFF automatically after a time of
your choice.
(b) To set the main oven to switch ON and OFF automatically, at the times of your choice.
(a) To set the main oven to switch ON immediately and OFF automatically:
This allows you to cook for a specified duration, after which the oven will automatically
switch off.