Husqvarna 356 BT X-series - Manual (Page 17)

English – 17
MAINTENANCE
Maintenance schedule
Below you will find some general maintenance instructions. If
you need further information please contact your service
workshop.
Daily maintenance
1 Clean the outside of the machine.
2 Check that the throttle control functions safely.
3 Check that the stop switch works correctly.
4 Check that nuts and screws are tight.
5 Check that there are no fuel leaks.
Weekly maintenance
1 Clean the air filter. Replace if necessary.
2 Clean the outside of the spark plug. Remove and check
the electrode gap. Adjust the gap to 0.5 mm or change the
spark plug.
3 Clean the cooling system.
Monthly maintenance
1 Check fuel hose for cracks or other damage. Change if
necessary.
2 Check all cables and connections.
3 Replace the spark plug. Check that the spark plug is fitted
with a suppressor.
4 Check and clean the spark arrestor mesh on the muffler.
5 Check that the vibration damping elements are not
damaged.
6 Clean the fuel tank.