Harbor Freight Tools 93762 User Manual

Page 14

Text mode
Original mode

SKU 93762

For technical questions, please call 1-800-444-3353.

Page 14

MOTOR (81)

Motor Pulley (79) with the Shaft Key. Slide the Motor Pulley fully onto the Motor
Shaft. Then secure the Motor Pulley to the Motor Shaft, using one Socket Head
Screw (2). (See Figure I.)

MOTOR PULLEY (79)

SHAFT KEY (80)

(NOT SHOWN)

SPINDLE PULLEY (1)

V-BELT (10)

To Install The V-Belt:

The V-Belt (10) can be installed by loosening the Hex Bolt (70) and moving the
Motor (81) forward. Place the V-Belt around the top grooves in the Spindle
Pulley (1) and Motor Pulley (79). Next, move the Motor backwards to tighten the
tension on the V-Belt. Then, re-tighten the Hex Bolt to secure the Motor in place.
(See Figures I and J.)

FIGURE I

HEX BOLT (70)

To Adjust The Cutting Speed:

The Bandsaw is designed to cut at three different speeds: 80, 120, and 200
FPM (Feet Per Minute) depending on the type of material being cut.

FIGURE J