haier HT-3768 - Manual (Page 11)

ASM VHFL 0
STOP
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
There are three ways of searching: automatic search, manual search and MFT
(manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about
the remote control.
Automatic search
Tuning
Automatic search
1. Press button, until
appears on the screen.
MENU
TUNING
2. Press button to move
the indicator( )to
.
CH+/-
AUTO MEMORY
3. Press , then
mode will work.
The TV set will search
automatically all available
programs, after that, all
available programs will be
stored in turn and the TV set
will return to the first channel.
VOL+
AUTO MEMORY
If you want to stop the search, just press button.
The order of the automatic search is due to the frequency
of the program, generally speaking, it is used only at the
first time you search the program, and once the order of
the program has been confirmed, you don't have to use
this function, otherwise the order of the program will be
changed.
VOL-
After searching
Press button to check the channels.
If the color or sound is abnormal in a certain channel, it
may be the color or sound system has not been set properly,
so you should adjust it to the proper system (Reference to
page 8).
CH+/-
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY