beautypg.com

Maintenance, Please read the following carefully – Harbor Freight Tools 95797 User Manual

Page 6

background image

Page 6

SKU 95797

for technical questions, please call 1-800-444-3353

Note: Test that the Top Assembly and Lantern are secure before hanging on the
Shepherd’s Hook.

mAiNTENANCE

wARNiNG! Make sure the Power Switch (18) of the Solar Candle Garden Lantern
is in its “OFF” position before performing any inspection, maintenance, or cleaning
procedures.

2.

bEfORE EACH uSE, inspect the general condition of the

Solar Candle Garden

Lantern. Check for loose screws, cracked or broken parts, damaged electrical
wiring, and any other condition that may affect its safe operation.

Do not use

damaged equipment.

3.

Clean the outside of the

Solar Candle Garden

Lantern with a clean and damp

cloth. Never use abrasive cleaners; they will damage the unit. You may use a mild
detergent. Never submerge the

Solar Candle Garden

Lantern in water or any other

liquid.

pLEASE READ THE fOLLOwiNG CAREfuLLy

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY

DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION

OF REPLACEMENT PARTS THERETO.

1.

NiCd Batteries (8). The polarity of the batteries is marked inside the Battery Case
(10). Be careful of the internal components and do not disturb the wires.

Once the batteries are in place, match up the notches and return the Top Assembly.
Twist clockwise onto the Plastic Ring (11). Then tighten.

4.