beautypg.com

Analogue programmer, Setting the time, Starting the oven – Hotpoint SE61X User Manual

Page 6: Programming your cooking

background image

6

GB

Analogue programmer

Setting the time

Press the PROGRAMMER knob and turn it

anticlockwise to set the correct time.

! The clock can only be set if the oven is connected to

the mains. In case of a power failure, the

PROGRAMMER will stop: the correct time will have to

be reset.

Starting the oven

1. Turn the PROGRAMMER knob anticlockwise until

the “9” symbol is displayed.

2. Pull the PROGRAMMER knob and turn it

anticlockwise until the knob marker lines up with the

current time. A click will indicate the end of the

programming phase.

3. Select the desired cooking mode using the

SELECTOR knob.

4. To turn the oven off, set the SELECTOR knob back

to the “0” position.

Programming your cooking

Programming instant cooking time

1. Turn the PROGRAMMER knob anticlockwise until

the desired cooking time is displayed.

2. Pull the PROGRAMMER knob and turn it

anticlockwise until the knob marker lines up with the

current time. A click will indicate the end of the

programming phase.

3. Select the desired cooking mode using the

SELECTOR knob. The oven comes on immediately

and stays on for the entire duration of the set cooking

time.

4. When the selected time has elapsed, a buzzer will

sound and the oven will turn off.

5. Turn the PROGRAMMER knob anticlockwise until

the “9” symbol is displayed.

6. To turn the oven off, set the SELECTOR knob back

to the “0” position.

• For example: it is 9:00 a.m. and a time of 1 hour

and 15 minutes is programmed. The programme

stops automatically at 10:15 a.m.

Programming a delayed cooking time

1. Turn the PROGRAMMER knob anticlockwise until

the desired cooking time is displayed.

2. Pull the PROGRAMMER knob and turn it

anticlockwise until the knob marker lines up with the

desired cooking start time.

3. Select the desired cooking mode using the

SELECTOR knob. The oven will come on at the set

cooking start time and will stay on for the entire

duration of the set cooking time.

4. When the selected time has elapsed, a buzzer will

sound and the oven will turn off.

5. Turn the PROGRAMMER knob anticlockwise until

the “9” symbol is displayed.

6. To turn the oven off, set the SELECTOR knob back

to the “0” position.

• For example: it is 9:00 a.m. and a time of 1 hour

and 15 minutes is programmed and the start time is

set to 11:00. The programme starts automatically at

11:00 and ends at 12:15.

! To cancel programming, turn the PROGRAMMER

knob anticlockwise until the symbol “9” is displayed.

12

3

6

9