Honeywell TE821WD - Manual (Page 3)

3
Introduction
Thank you for selecting the Honeywell Semi-Professional Weather Station. This compact and easy-to-use product uniquely
measures and monitors weather data right at your immediate location. It includes a wide range of weather features plus
precise atomic time and perpetual calendar. Weather measurements include: air temperature, relative humidity, barometric
pressure, wind speed and direction, rainfall levels and more.
Standard Package Contents
In this package you will find:
One Main Unit (receiver) (TE821WD)
One Rain Gauge (remote rain sensor/transmitter) (TS906)
One Anemometer (remote wind sensor/transmitter) (TS805)
One Three-Channel Temperature & Humidity Sensor (transmitter) (TS33C)
One 7.5V AC/DC Adapter
Anemometer Mounting Hardware with wrench tool
One User Manual
Required for installation (not included)
- Small Phillips screwdriver
- Anemometer mounting pole
- Small paper clip to reset sensors
NOTE: If any items are missing or damaged, please contact Hideki Electronics Customer Service before proceeding with
installation.
Installation
The Honeywell Semi-Professional Weather Station operates at 433MHz radio frequency, so no wire installation is required
between the main unit (receiver) and the remote weather sensors (transmitters). The remote weather sensors include (1)
thermo-hygrometer (temperature and humidity) sensor, anemometer (wind sensor) and a rain gauge (rain sensor). All data
measured by these remote sensors is transmitted to the main unit wirelessly, with the operating range up to 328 feet (100
meters) in the open area. The Anemometer and the Rain Gauge must be placed outdoors to measure weather elements.
Remote Thermo-Hygrometer can be placed indoors or outdoors. If you intend measuring outdoor temperature and humidity,
place the remote sensor outdoors, preferably not in the direct sunlight.
Before you begin
The components of this Honeywell Semi-Professional Wireless Weather Station operate at 433MHz radio frequency. No