Hamilton Beach HBF400 - Manual (Page 5)

Blender Operation – Quick Start Guide
1. Read Important Safety Instructions and Warnings
before use.
2. Place the blender on a dry, level surface.
3. Make sure the Power/Reset switch is set to
OFF (O), and the Standby/ON (I) switch is set to
STOP
. Plug the blender into a grounded 3-
prong electrical outlet.
4. Place the container on the base with ingredients
and container lid in place.
5. Turn the Power/Reset switch on the rear of the
base to the ON (I) position.
6. Select the desired speed: HIGH (2) or LOW (1).
7. Adjust the timer knob to desired run time.
8. Set the Standby/ON (I) switch to START or
use PULSE .
Control Panel
Stop
High
Speed
Low
Speed
Start
Standby/ON (I)
Timer Knob*
* 3 Min. Max
5
Pulse
120 VAC, 60Hz
Power Requirements
Use a fused electric outlet for the blender. Depending on the model of your blender, the plug will look like
the following to meet power requirements:
Ground
prong
230 VAC, 50Hz 230 VAC, 50Hz