Hitachi P50S602 - Manual (Page 30)

30
Video
Select VIDEO to adjust picture settings and improve picture
quality. You can independently customize each of the video inputs
to your preference to increase viewing performance and pleasure
depending upon the video program being viewed. If RESET is
selected, only the selected input will reset to initial conditions.
Video
Audio
TV Guide On Screen
Channel Manager
Locks
Timers
Setup
Move SEL Select
OR
Black Enhancement
Light Sensor
Color Temperature
Sharpness
Tint
Color
Brightness
Contrast
Picture Mode
Video
Move SEL Select
Air
High
Off
High
50%
0
50%
50%
100%
Dynamic
Picture Mode
Use this function to choose from automatic picture settings to
optimize your TV’s performance.
Use the CURSOR buttons 1. or to highlight and select
PICTURE MODE settings (Dynamic, Day or Night).
Then press the SELECT button to set the mode and return to 2.
the Video menu or press EXIT to quit menu.
There are 3 Picture Modes available : Dynamic, Day and Night 3.
mode. Dynamic is the factory preset mode for RETAIL Energy
Saving Mode and Day is the factory preset when HOME Energy
Saving Mode is used (refer to page 41). This can be changed
by adjusting any video setting to your desire conditions. Day
can be used as a second video setting for daytime viewing.
Night is set to optimize programing during nigthtime.
Other Video Menu Settings Adjustment
Use the CURSOR PAD or to highlight the function to be
adjusted.
Press the SELECT button or the CURSOR PAD 1. to select the
function settings.
Press the CURSOR PAD 2. or to adjust the function.
Press MENU to return to main menu. 3.
Press EXIT to quit menu. 4.
Contrast
Use this function to change the contrast betwen black and white
levels in the picture.
Brightness
Use this function to change the overall brightness in the picture.
Color
Use this function to adjust the level of color in the picture.
Tint
Use this function to adjust flesh tones so they appear natural.
Sharpness
Use this function to adjust the amount of fine detail in the picture.
Color Temperature
Set this to High for cooler color with more blue, set to Medium
for more natural color, set to Standard for accurate color or set to
D. Cinema for color to match the cinema accurately.
Light Sensor
When on, the light sensor will automatically adjust the contrast
setting according to brightness of the room. Select off to manually
adjust the contrast setting.
When the Light sensor function is set to ON, Contrast
Mode (see below) will be disabled (grayed out).
Black Enhancement
Use this function to enhance the shadow detail in dark scenes
using the settings off, low, middle and high.
If CONTRAST is selected, you are adjusting •
CONTRAST. The additional menu items
BRIGHTNESS, COLOR, TINT, and SHARPNESS
can be selected and adjusted in the same
manner.
It may be necessary to adjust TINT to obtain •
optimum picture quality when using the
COMPONENT VIDEO Y-P B P R input jacks.
CABLE and AIR share a Video setting. Also, each •
of the video inputs have their own independent
settings.
Black Side Panel
Lip Sync
Cinema48
Color Space
Auto Movie Mode
MPEG-NR
Noise Reduction
Contrast Mode
Black Enhancement
Video
Move SEL Select
Air
Off
0
Off
Vibrant
Off
Off
Off
Dynamic
High
Contrast Mode
Use this function to choose between two Contrast Mode settings.
Set to DYNAMIC for more contrast and set to NORMAL for a more
cinematic film like image.
Noise Reduction
The NOISE REDUCTION function automatically reduces
conspicuous noise in the picture without degrading picture quality.
Set NOISE REDUCTION to OFF if you see individual block in the
picture.
MPEG NR
The MPEG NR (Noise Reduction) function automatically reduces
mosquito noise in the picture without degrading picture quality. Set
MPEG NR to OFF if the TV experiences picture block noise.
NOTES
NOTE