Huffy 1310 - Manual (Page 9)

05/03 P/N 214653B
9
1.
1
Remove contents from tank
4
6
TOP
BOTTOM
5”
(13 cm)
2.
Correctly identify each pole
section and mark indicated
distance from ends with tape
(not supplied) as shown.
3. IMPORTANT! Center the alignment slot of middle pole section (5) in the
lower hole of top pole section (4) as shown. While maintaining alignment,
bounce middle section of pole (5) into top section of pole (4) using wood scrap
as shown until they no longer move toward taped reference mark.
NOTE: Pole sections should have a 3-1/2" (9 cm) minimum overlap.
MIDDLE
5
5”
(13 cm)
WOOD SCRAP
(NOT SUPPLIED)
5
4
TAPE (Not Supplied)