haier 650 - Manual (Page 7)

Using process Using process
Introduction of the major function
Use the foam-removing spinning to
remove the extra detergent liquid. It
can both shorten the washing time
and save the water consumption.
Foam-removing
spinning
Remove most of
the foam extra
detergent liquid.
Remove the detergent
liquid remained
The effect is best when the
laundries quantity is below
80% of the rated value.
Spin
Fill water for
about 1 minutes
Spin for about
1~2 minutes
Quick water-filling entrance
The machine has good comprehensive performance, and nice appearance.
For the design on mute ,It adopts complete enclosed base frame and low-noise
motor, and thus reduces the working noise significantly. We can guarantee that the
purchase of this machine will bring you a clean world without disturbing your quiet life.
Foam-removing spinning during high-efficiency rinsing
The cascade washing it adopts can enhance
the strength of the water current, and dissolve
the detergent quickly and completely. At the
same time it can produce flushing effect, and
improve the washing effect.
Cascade washing
If you do not need spraying spin, you can
fill water into the wash tub directly through
this entrance. It can reduce the humidity
inside the control panel significantly and
prolong the operating life of the components.
Quick water-filling entrance