Huffy 1332G - Manual (Page 10)

10
P/N 211994C 10/03
4
5
6
WOOD SCRAP
4. IMPORTANT! Center the alignment slot of lower pole section (6) in the lower
hole of middle pole section (4) as shown. While maintaining alignment, bounce
top and middle pole assembly (4 & 5) onto bottom section of pole (6) using wood
scrap as shown until they no longer move toward taped reference mark.
6
5
5.
Install rod (7) through holes in bottom pole section (6) and eyebolt (8).
8
7
6
8
7
4
6
5
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM) MINIMUM
OVERLAP.
NOTE: