Hitachi DZMV730A - Manual (Page 56)

English
56
123
Zooming
If you continue to hold the zoom lever on the
“T” control side with Dig. Zoom 40× or 240×
specified, the digital zoom will be activated
midway (when optical 10-power is exceeded on
DZ-GX20A or DZ-MV780A, or optical 16-power
is exceeded on DZ-MV730A).
You can zoom up to 240-power.
1
Press the MENU
button, choose “Dig.
Zoom” on the “Camera
Functions Setup” menu
screen, and then press
the A button.
2
Choose the desired magnification, and then
press the A button.
3
Press the MENU button to end the setting.
Moving the zoom lever will display the
digital zoom bar.
Note :
• The digital zoom setting will be stored in memory
even if the DVD video camera/recorder is turned off.
• You can also use the DIGITAL ZOOM button on
remote control to switch the digital zoom setting:
Pressing the button during movie recording will switch
the setting between “Off”, “40×”, and “240×”: Pressing
the button during photo recording will switch between
“Off” and “40×”.
• If you set zoom to “240×” when recording photo, the
digital zoom will be up to 40×.
• When a subject is zoomed, it may be momentarily out
of focus.
• When digital zoom is engaged, the image quality will
be rougher.
W: recording wide area
(wide-angle)
T: recording enlarged
image (telephoto)
P r o g r am AE
Wh i t e Ba l .
D i g . Z o om
E I S
4 0 x
2 4 0 x
ENTER RETURN RAM
O f f
M I C . F i l t e r
Came r a F u n c t i on s S e t u p
3 0 MIN
0 : 0 0 : 0 0
REM
FINE
T W
W
W
T
T
When Dig. Zoom is “Off”
When Dig. Zoom is “On” (40x)
Digital zoom range
When Dig. Zoom is “On” (240x)
Digital zoom range
(only in movie recording)
8 : 0 0 AM
9 / 3 0 / 2 0 0 5