Setting up the treadmill – Healthrider HCTL06190 User Manual

Page 6

Text mode
Original mode

SETTING UP THE TREADMILL

Set-up requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until the treadmill is set up. No tools are required.

With the help of a second person, carefully raise the Uprights (82)
until the Front Wheels (77) are resting on the floor as shown.

Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure
place. The allen wrench is used to adjust the walking belt (see pages 16 and 17). To protect the floor or carpet,
place a mat under the treadmill.

For your benefit, we recommend that you familiarize yourself with the “TROUBLE-SHOOTING AND MAINTE-
NANCE” section on pages 15 to17 before using the treadmill.