Name of parts specifications, Accessories, Standard accessories – Hitachi H 65 User Manual
Page 7: Optional accessories…sold separately
6
NAME OF PARTS
SPECIFICATIONS
Motor
Single-Phase, Series Commutator Motor
Power Source
Single-Phase, 115V AC, 60 Hz
Current
11.4A
Full-Load Impact Rate:
1,400/min
Weight
39.7 lbs (18 kg)
ACCESSORIES
CAUTION:
Only following genuine accessories for this power tool should be used.
The use of any other attachment or accessory is not recommended because it may cause
hazard including bodily injury.
STANDARD ACCESSORIES
(1) Steel Case .......................................................................................................................... 1
(2) Bull Point (Code No. 985230) ........................................................................................... 1
(3) Oil Feeder (Code No. 931848) .......................................................................................... 1
(4) Hexagon Bar Wrench for M8 (Code No. 872422) ........................................................... 1
(5) Wrench (Code No. 971109) .............................................................................................. 1
OPTIONAL ACCESSORIES…sold separately
1.
Bull point
Overall length: 20-1/2”(520 mm)
Code No.:
985230
2.
Cold chisel
Overall length: 20-1/2” (520 mm)
Code No.:
985231
Fig. 1
Front Cover
Side Handle
Name Plate
Switch Trigger
Retainer
Oil Gauge
Handle Cover
Cap Cover