haier R-Series HL22R1 - Manual (Page 8)

COMPONENT IN
Pr Pb Y
ATN IN R-AUDIO-L R-AUDIO IN-L PC AUDIO IN VGA IN USB HDMI S-VIDEO IN VIDEO
Connection Options
The above figure is for reference
only, connections may differ
depending upon the models and
terminals of some models may be
on the back bottom of the set
DVD insert
DVD
STOP
STOP
PLAY/PAUSE
PLAY/PAUSE
OPEN/CLOSE
OPEN/CLOSE
PREV
PREV
NEXT
NEXT
Label towards back
1.ANT IN(Antenna Input) Connect cable or antenna signals to the TV, either
directly or through your cable box.
2.Headphone jack : Headphone audio output terminal.
3.Audio in Connect audio output from an external device to these jacks.
4.S-VIDEO Connect S-Video out from an S-Video device to the jacks.
5.Audio in Connect audio output from an external device to these jacks.
6.Video in Connect video output from an external device to this jack.
7.USB input Connect a USB flash drive to view JPEG images or listen to MP3
songs.
8.VGA Connect to the VGA 15PIN analog output connector of a PC
graphics card to use set as a PC display.
9.PC audio in Connect the audio output from the pc to the PC audio input port.
10. HDMI: Connect a HDMI device to receive digital audio and uncompressed
digital video.
11. Component Input Connect a component video device to these jacks.
R1 series series K1