haier XQJ100-96 - Manual (Page 11)

2 Put in the laundries
Loading suggestions(maximum size loads)
Heavy Work Clothes
3 trousers
3 shirts
4 jeans
1 coat
1 overcoat
Please set water level to "high" for the following maximum size loads
Towels
10 bath towels
10 hand towels
14 wash clothes
1 bath blanket
Mixed load
3 double bedsheets
4 pillowcases
8 T-shirts
6 cotta
2 shirts
2 boy's suits
8 handkerchiefs
Delicate fabrics
3 woman's underwear
1 coat
4 slippers
4 underwear
2 corset
1 babywear Knitting
3 t
3 boy's suits
6 shirts
4 caps
4 formal dress
rouser
How to place the laundry into the
washing machine in a right way
Place the laundry into the washing machine loosely till
the upper of the washtub is full of the laundries(up to
the hightest holes located). Do not twist the laundry
round the agitator, the laundry should be easily lifted
from water to obtain the best washing effect and anti
-crease effect. The laundry should go downward first,
after some time go up again.
Correctly load the laundry and choose the right water
level. Overload or stack or too low water level will lead
to: ---wash not clean
---winkling of the fabrics
---fluffing
---rapid wears of the fabrics (because of fluffing)
Loading should depend on the place the laundry
occupied, instead of the weight of the laundry itself.
Every time when you wash, mix the larger item and
smaller item and evenly place them into the washing
machine to keep the machine in balance. Unbalance
will lead to vibration and noise when spin cycle starts.
For heavy-duty fabrics and some synthetics, in order
to prevent them from wrinkling, the allowed washing
laundry should be larger than the actual laundry size,
when washing, these laundry need largest space to
move than the bulky item like blankets and jeans.
The washing time should be reduced when you wash
fewer laundry. The less the laundry placed in, the
shorter the washing time needed.
Place a load of sorted clothes
into the washer