Philips 21PT5458 - Manual (Page 4)

2
Remote control keys
Surround Sound
To activate / deactivate the
surround sound effect. In stereo,
this gives the impression that the
speakers are further apart.
VCR key *
Screen information /
permanent no.
To display / clear the program
number, name (if it exists) and
audio mode. Press the key for 5
seconds to activate permanent
display of the number.
Menu
To call up or exit the menus.
Volume
To adjust the sound level
Cursor
These 4 keys are used to navigate
through the menus.
Teletext keys (p.4)
or VCR keys *
Selection of EXT
socket (p.3)
* VCR key
The remote control lets you control the main functions of the VCR.
Press and hold down the VCR key located on the side of the remote control, then press one of the keys to access
the VCR functions:
b % ∫ H оП И¬
P
@# · ¢ К Ж 09
The remote control is compatible with all VCRs using the RC5 standard.
Standby
Lets you place the TV set on
standby.To turn on the TV, press
P
@ @ , b , 0 to 9 .
Teletext keys (p. 4),
and VCR keys
16:9 Format (p. 5).
unused keys.
Smart picture and sound
Used to access a series of predefined
picture and sound settings.
The
personal position relates to
settings selected from the menus.
Mute
To mute or restore the sound.
Program selection
To access the next or previous
programme.The number, (name)
and sound mode are displayed for
a few moments.
For some programs, the title of the
program will be displayed at the
bottom of the screen.
Sound mode
Used to force programmes in
Stereo and Nicam Stereo to
Mono or, for bilingual
programmes, to choose between
Dual I or Dual II .
The Mono indication is red when in
forced position.
Teletext (p. 4)
Digit keys
Direct access to the programmes.
For a 2 digit programme, enter
the 2nd digit before the dash
disappears.
1 2
RADIO
TV
VCR
SMART SMART
MENU
P
5 6 4
8 7 9
0
· К ∆ Ж
∫
щ
› Ÿ
Ë
¤
ı
∏
%
3
- -
+ +
.
ª -
[ ”
Y
`
™ Ó
Sleeptimer
(only available on certain versions)
To select the length of time before
the set automatically switches to
standby (from 0 to 240 minutes)