Hearth and Home Technologies SL-350TRSI-AUE - Manual (Page 27)

27
Heat & Glo • SL-350TRSI-AUE • 2089-902 Rev. B • 6/06
1
2
3
4
5
6
1.8 LOG PLACEMENT INSTRUCTIONS
Log Set Assembly: LOGS-350CE-D
Carefully remove the logs from the packaging. CAUTION: Logs are fragile!
LOG #1 (SRV327-701): Place log #1 at the rear of the unit, with the left edge behind the tab on the pilot
bracket. The right side sits behind the tab on the support bracket.
LOG #2 (SRV2033-701): Locate the bottom groove of log #2 over the left most grate bar and align over
the burner by placing the log slot over the burner tab as shown.
1
2 2
SUPPORT
BRACKET
BURNER TABS
PILOT
BRACKET TAB
1